No easy to perfect the details- Brinyte DIV20 Double Head LED Canister Diving Light

As a tiny part of the huge diving equipment market, the primary difference of diving lights is the brightness and appearance for most divers. Small make great,details make perfect.

Each participator of Yeguang company has held the spirit of supervising the details and  led into the humanity design ideas of lighting products, to prevent your confusion about the choice and usage of the underwater lighting products. The new Brinyte DIV20 Double Head LED Canister Diving Light is a typical example.

1 Direct recharging design

Brinyte DIV20 is the first diving light with direct charging design in Yeguang Company. No need to take batteries out and then charge one by one through battery charger . You could directly and easily charge eight 18650 lithium batteries at one time through the charging port at the light head.The exposed charging port has the internal and external dual waterproof design. When the seal is accidentally watered in , the water just stays on the surface of the battery canister and cannot come into the battery tube.

2 Detachable heads

Two ports on the battery canister apply to rotate and replace the light heads. Your options about what to bring with could range from a single light , double lights , the main light to video lights, depending on your actual diving demand . A waterproof cap is used to well protect the other contact part. As a professional LED diving flashlight manufacturer, the length of the Brinyte DIV20 connecting wire could be real-time customized according to your market requirement.

3 Brightness and run time

Just like the other hot LED Canister Diving Light Brinyte DIV10 , the canister dive light DIV20 utilize three USA CREE XM-L2 LEDs. In order to balance the brightness and run time of the light, Brinyte’s engineers design the single head only max output 2000 lumens, not 3000 lumens of Brinyte DIV10 ,but which can arrive 5 hours runtime. It will not only better satisfy the brightness demand of primary light but also meet run time demand.

4 Head side-push on/off magnetic switch design

The design of head side-push on/off magnetic switch makes it easier to underwater turn on/off and change models. The push switch can well avoid the misoperation underwater.

5 Surface of the battery canister

There is no knurl on the surface of the battery canister, and type III military hard-anodized finish. These designs are not only convenient to clean light after diving, but also minimize the harm of seawater corrosion. Big size bolt snap design can increase friction and then more conveniently unscrew the lid.The standard 38mm diameter hole in the tail-cap bezel help to easily assemble the battery canister of the flashlight.

6 Good conduction connection with gilded SMD

Open the Brinyte DIV20 battery canister, you will find gilded SMD used to conduct. Gilded SMD is easy to conduct , ductility good and has long life.

7 Waterproof Connector design

The use of Waterproof Connectors in both ends of the wire between head and light body , efficiently avoid contact problems caused by the bending of the wire at each end.

Perfect the details, insist on the quality. Brinyte DIV20 Double Head LED Canister Diving Light——Don’t miss it!